Portable Battery Power Station 1200W, 917Wh, 230V, USB-C PD

Portable battery power station with a capacity of 917 Wh with UPS function
It supports eleven devices simultaneously. The built-in bidirectional AC converter with a pure sine wave with a rated power of 1200 W (up to 2400 W peak) will work, among other things, as an emergency power source. for the pump and controller of the central heating furnace, router, desktop computer, most power tools and many other devices. Six USB ports, including two USB-A with QC technology up to 18 W, two USB-C with PD technology 60 W and PD100 W, will provide power and constant charging of a smartphone, tablet or laptop.
The 12 V socket will successfully power a travel refrigerator or special lighting.
Two 12V sockets can be used, for example, to maintain voltage in a car while charging the battery.

The UPS function ensures continuous operation of connected devices in the event of a power failure, will support devices with a total rated power of 500 W.

In the event of a power failure, the module will switch from mains power to battery power in no more than 20 milliseconds (not noticeable to devices).
The energy reserve at full charge and constant consumption of 500 W is enough for about two hours of continuous operation.
Built-in power bank with 98 lithium-ion cells with a high discharge rate using NMC / INR technology in an 18650 case with a nominal voltage of 3.6 V and a capacity of 2600 mAh (total 254800 mAh).
The capacity does not fall below 80% of the original value even after 500 full discharge cycles.
The cells are located in a durable basket with a structure that allows free air access to each cell, which significantly improves cooling efficiency.
Advanced BMS system that monitors all current parameters and cell temperature in real time, ensuring the safety of the charging and discharging process
The BMS has protection against overcurrent, short circuit, overdischarge, overcharge, overvoltage and overheating.
The cell balancing system extends the service life of the entire package.
Special USB-C port for exciting the cell block – if we leave the station discharged to 0% for a long time and the device does not respond to the connected charger, then using a 5 V, 2 A power source we can excite the cells and restore the operation of the station and BMS.
Charging the station is possible in three ways: thanks to a bidirectional converter, fast charging directly from a wall outlet, using a car cigarette lighter cable or from external photovoltaic panels.
As one of the few on the market, it has a built-in MPPT charging regulator, allowing full use of the energy supplied by the panels without shutting off excess voltage.
Manufactured in accordance with standards for automotive use.
Additional information:

Total harmonic distortion (THD) at full load: ≤3%.
Operating time at rated device load (1200 W): 40 min.
Charging time from the network: ~1.4 hours.
Charging time from a car cigarette lighter: ~6-9 hours.
Charging time from photovoltaic panels: ~6 hours.
Continuous power from 230 V AC outlets: 1200 W (peak 2400 W).
Cigarette lighter socket: 12V/10A.
2 sockets: 12V/10A.
2 USB-A ports: 5V/3.1A.
2 USB-A ports: 18W with QC 3.0 technology.
2 USB-C ports: 60W and 100W with PD technology.
BMS protection: overcurrent, short circuit, overdischarge, overcharge, overvoltage, overheating.
Inverter protection: from too low or too high voltage, short circuit.
LED flashlight with 3 modes, including SOS, 2W.
Dimensions: 387 x 285 x 219 mm.
Weight: 12 kg.
Package: station, power cable, cable for charging the product from a 12V DC power plant, cable for charging the product from an external solar panel.